Burks bkts ultrasonic flowmeter

When the ultrasonic beam propagates in the liquid, the flow of the liquid will cause a slight change in the propagation time, and its propagation time is proportional to the flow rate of the liquid, and its relationship conforms to the following expression:

Where e is the angle between the sound beam and the liquid flow direction, M is the straight-line propagation times of the sound beam in the liquid, D is the pipe diameter

Tup is the propagation time of sound beam in the positive direction, tdown is the propagation time of sound beam in the reverse direction, a T = TUD tdown

1. Water, sewage and sea water

2. Water supply and drainage

3. Power plants (nuclear, thermal and hydro)

4. Heating, heating and heating

5. Metallurgy, mining

6. Petroleum and chemical industry

7. Food and medicine

8. Hull operation and maintenance

9. Energy conservation monitoring and water conservation management

10. Papermaking and pulping

11. Leakage inspection

12. Flow inspection, flow tracking and collection

13. Heat measurement and heat balance

14. Flow and heat management and monitoring network system

Fixed ultrasonic flowmeter -- easy to install

Nominal diameter: dni5 ~ 6000mm output: 4 ~ 20mA, RS232 / 485 accuracy: ± 1%

Flow rate range: 0 ~ 30m / S

Portable ultrasonic flowmeter -- low power consumption ultrasonic performance

Nominal diameter: DN15 ~ 6000mm sound alarm: the buzzer can send out alarm sound according to the setting, programmable batch deposit) intelligent field printing function of the controller, to ensure the complete backlight LCD of flow data can display instantaneous flow, cumulative flow, flow rate, time, heat and other data at the same time

Hand held ultrasonic flowmeter -- small volume, light weight, easy to carry

Nominal diameter: DN15 ~ 6000mm measurable medium: water, sewage, chemical solution, oil, alcohol, and other liquid measurement processes that can transmit ultrasound do not need to damage the pipeline, do not need to stop production, the sensor does not contact with the measured medium, and there is no pressure loss.

The sensor is easy to install,

It is used to measure the medium signal output of various pipes: 4 ~ 20mA current, relay alarm

RS232 / 485 computer interface