Burks BN-Lift130L BN-Lift 300L sewage lift pumping station

Brief introduction

BN-Lift130L BN-Lift 300L is a medium and large automatic sewage lifting pump.

It is suitable for directly discharging sewage to

The main site of the sewer.

application

BN-Lift130L BN-Lift 300L is mainly used for:

● basement washing machine and shower room (or hand washing) below main sewer

Or air conditioning condensate, etc.

● single family villas, multi row villas, hotels and cinemas

Raw domestic sewage is suitable for large flow intermittent drainage places.

(if the liquid being pumped contains other hard objects, it may cause

This kind of failure is not covered by the warranty).

Dimensions

BN-Lift130L(/)II Dimensions

Technical data

Mechanical data

Pumping liquid

It is formed naturally by sewage and rainwater produced by life

Sewage.

● allowable liquid temperature: 45 ℃ C maximum

● domestic wastewater and surface sewage.

Allowable liquid pH: 4-10.

Strong chemical solvents are not allowed.

Installation procedure

Tools to be used: electric hand drill, 100 mm hole opener (water inlet)

Opening), 32mm tapper (water inlet opening and air vent opening),

A screwdriver.

If possible, the upper water inlet connection should be used as far as possible (to prevent water from entering)

Water in pipeline)

1: the diameter of BN lift series outlet pipe is UPVC with outer diameter of 63mm

The water supply pipe is connected with the on-site water outlet pipe with glue

Configure the big and small head to realize the docking with the field pipe diameter, such as on-site

63mm PVC flange and DN50 steel pipe can be installed for galvanized steel pipe

Docking. (special glue should be used to connect the outlet pipe, and PVC should be used

The water glue equipment is equipped with check valve, which needs to be installed in the outlet pipe

Installation of stop valve and damping joint)

2: the ventilation port of the equipment can be connected to the PVC drainage pipe with the outer diameter of 50mm

If it is not in line with the field pipe diameter, the reducer can be used to reduce the diameter of the pipe

It is connected to the vent, and stainless steel clamp is used for ventilation pipe and equipment

Connect the outlet pipe with PVC water supply

Special glue, vent pipe installation requirements higher than the roof or room

Outside green belt)

● 3-4: bn-lift130l (/) II series has 4 Φ 110 water inlet reserved

And 2 water inlets of Φ 50. Bn-lift 300L / II Series

Six water inlets of Φ 110 and one of Φ 50 are reserved. according to

According to the need of site water intake, the corresponding water inlet opening can be selected

Connect the lines.

The small end of the flexible connection is fixed on the On the inlet pipe